機床規格:
| Item | Unit | MA-400HA | |||
| Travels | X-axis travel (column left/right) | mm (in.) | 560 (22.05) | ||
| Y-axis travel (spindle up/down) | mm (in.) | 610 (15.49) | |||
| Z-axis travel (table front/back) | mm (in.) | 625 (24.61) | |||
| Spindle center to pallet top | mm (in.) | 50 to 660 (1.97 to 25.98) | |||
| Spindle nose to pallet center | mm (in.) | 85 to 710 (3.35 to 27.95) | |||
| Pallet | Work area | mm (in.) | 400 × 400 (15.75 × 15.75) | ||
| Indexing angle | deg | 1 [0.001] | |||
| Max workpiece dimensions | mm (in.) | ø600 × 710*1 (ø23.62 × 27.95) | |||
| Max load capacity | kg (lb) | 400 (880) | |||
| Spindle | Spindle speed | min-1 | Standard 50 to 8,000 |
Wide-range [50 to 15,000] |
High-speed [50 to 20,000, 50 to 25,000, 35,000] |
| Tapered bore | 7/24 taper No. 40 [HSK-A63] |
[HSK-A63, A63, F63] | |||
| Bearing dia | mm (in.) | ø70 (ø2.76) | [ø70, ø60, ø60] (ø2.76, ø2.36, ø2.36) |
||
| Feed rate | Rapid traverse | mm/min (ipm) | X-Y-Z: 60 (2,362) | ||
| Cutting feed rate | mm/min (ipm) | X-Y-Z: 1 to 60,000 (0.04 to 2,362) | |||
| Motors | Spindle (10 min/cont) | kW (hp) | 15/11 (20/15) | [26/18.5 (35/25)] | [30/22, 15/11, 15 (40/30, 20/15, 20)] |
| Feed axis motors | kW (hp) | X-Y-Z: 4.6 (6.3) | |||
| Table indexing | kW (hp) | 3.0 (4.1) | |||
| ATC | Tool shank | MAS-403 BT40 [HSK-A63] | [HSK-A63, A63, F63] | ||
| Pull stud | MAS-2*2 *3 | – | |||
| Magazine capacity | tools | 30 [40, 60, 110, 146, 182, 218, 326]*4 | |||
| Max tool dia (w/ adjacent) | mm (in.) | ø100 (3.94) | |||
| Max tool dia (w/o adjacent) | mm (in.) | ø150 (5.91) | |||
| Max tool length | mm (in.) | 300 (11.81) [400 (15.75)]*5 | |||
| Max tool weight | kg (lb) | 10 (7.4) | |||
| Tool selection | Memory random (Fixed with 110 or more tools) | ||||
| Machine Size | Height | mm (in.) | 2,759 (108.62) | ||
| Floor space; width × depth | mm (in.) | 2,414 × 4,532 (95.04 × 178.43) | |||
| Mass | kg (lb) | 11,400 (25,080) | |||
| CNC control | OSP-P300MA | ||||
[ ]: Optional specifications
*1. ø500 × 710 (ø19.68 × 27.95) when the spindle must operate within 50 mm (1.97 in) from the pallet (X-Y-Z telescopic cover interference).
*2. Thru-spindle coolant specs use JIS standard specs.
*3. Pull studs not supplied with HSK toolholders
*4. Matrix system with more than 110 tools.
*5. “ Long tools ” may require the shutter to wait and result in longer ATC C-C times.
