- 尺身上固定有一種規格螺紋用測砧。
- 帶有公制(UNF)60º用的基點調整用量桿。
- 直接讀取螺距直徑(無需計算)。
- 帶有恆定測力的裝置。
規格:
| Metric | ||
| Order No | Range | Screw to be measured |
| 125-101 | 0-25mm | 0.4 – 0.5mm/64 – 48TPI |
| 125-102 | 0-25mm | 0.6 – 0.9mm/44 – 28TPI |
| 125-103 | 0-25mm | 1 – 1.75mm/24 – 14TPI |
| 125-104 | 0-25mm | 2 – 3mm/13 – 9TPI |
| 125-105 | 0-25mm | 3.5 – 5mm/8 – 5TPI |
| 125-106 | 25-50mm | 0.4 – 0.5mm/64 – 48TPI |
| 125-107 | 25-50mm | 0.6 – 0.9mm/44 – 28TPI |
| 125-108 | 25-50mm | 1 – 1.75mm/24 – 14TPI |
| 125-109 | 25-50mm | 2 – 3mm/13 – 9TPI |
| 125-110 | 25-50mm | 3.5 – 5mm/8 – 5TPI |
| 125-111 | 50-75mm | 0.6 – 0.9mm/44 – 28TPI |
| 125-112 | 50-75mm | 1 – 1.75mm/24 – 14TPI |
| 125-113 | 50-75mm | 2 – 3mm/13 – 9TPI |
| 125-114 | 50-75mm | 3.5 – 5mm/8 – 5TPI |
| 125-115 | 50-75mm | 5.5 – 7mm/4.5 – 3.5TPI |
| 125-116 | 75-100mm | 0.6 – 0.9mm/44 – 28TPI |
| 125-117 | 75-100mm | 1 – 1.75mm/24 – 14TPI |
| 125-118 | 75-100mm | 2 – 3mm/13 – 9TPI |
| 125-119 | 75-100mm | 3.5 – 5mm/8 – 5TPI |
| 125-120 | 75-100mm | 5.5 – 7mm/4.5 – 3.5TPI |
