機械仕様
| Model | QMC-850 | |
| TRAVEL | X x Y x Z axis | 850 x 550 x 560 mm |
| Spindle nose to table | 120~680 mm | |
| Spindle center to solid column surface | 600 mm | |
| TABLE | Working area | 950 x 500 mm |
| Max. loading | 500 kg | |
| T-Slots (No. x Width x Pitch) | 4 x 18 mm x 125 mm | |
| SPINDLE | Tool shank | BBT-40 |
| Speed | 10,000 rpm | |
| Transmission | Direct-Speed Belt Drive | |
| Bearing lubrication | Grease | |
| Cooling system | Oil cooled | |
| Spindle motor max.rating (MITSUBISHI) | 7.5kw (10HP) | |
| Spindle motor max.rating (FANUC) | 11kw (15HP) / 15kw (20HP) | |
| Axis motor max.rating (MITSUBISHI) | 1.5 / 2.2 / 3.0 kw | |
| Axis motor max. rating (FANUC) | 3.0 / 3.0 / 3.0 kw (STD) 3.0 / 3.0 / 4.0 kw (OPT) |
|
| FEED RATES | Rapids on X & Y & Z axis(linear way) | 36 / 36 / 25 m/min |
| Max. cutting federat | 10 m/min | |
| TOOL MAGAZINE | Tool storage capacity | 24 arm |
| Type of tool (optional) | BBT-40 | |
| Max. tool diameter | 100 mm / 76 mm | |
| Max. tool weight | 7 kg | |
| Max. tool length | 300 mm (arm) | |
| AVG.CHANGING TIME (ARM) |
Tool to tool | 2.7 sec. |
| Chip to chip (50% Z axis) | 6.7 sec. | |
| Air source required | 6 kg / c㎡ up | |
| ACCURACY | Positioning | P0.01 mm |
| Repeatability | Ps0.006mm | |
| DIMENSION | Machine weight | 5,900 |
| Power source required (KVA.) | 15 KVA | |
| Floor space (L x W x H) | 2,700 x 3,000 x 2,870 mm | |
| Shipment advice | 1 x 40’HQ (3 sets) |
