- ML15铣車複合加工機可取代單一車床、單一銑床,將原本多站且繁複的機台加工工序整合在一個機台即可完成。
- 高效益-單位投資產能最大化。
- 高精準-少量多樣加工增進備料精準度。
- 省錢-提升加工良率減少報廢損失。
- 省時-減少工件加工站數。
Model | Unit | ML-15 | |
Travel | X x Y x Z axis | mm (inch) | 200+80 x 400 x350 (7.87+3.14 x 15.74 x 13.77) |
A axis | deg. | -36~110 | |
CS2 axis | deg. | ∞ | |
CS1 axis | deg. | Fixed | |
Spindle | Speed | rpm | CS1:12,000 CS2:2,500 |
Transmission | – | CS1: Direct Drive CS2: Built-in | |
Spindle taper | – | BT30 | |
Clamping format | – | CS1: Disc spring broach CS2: Hydraulic clamping chuck | |
Max. spindle torque | nm | 50 | |
Feedrate | X/Y/Z axis rapid traverse (linear guide ways) | m/min | 60 / 60 / 60 |
Max. cutting feedrate | m/min | 20 | |
Work range of tilting table | Table Diameter | mm (inch) | 150 (5.9) |
Max. workpiece diameter | mm (inch) | 200 (7.87) | |
Max. workpiece height | mm (inch) | 200 (7.87) | |
Distance from spindle nose to table | mm (inch) | 50 (1.96) | |
Distance from spindle nose to tilting axis center | mm (inch) | 130 (5.11) | |
Distance from table to tilting axis center | mm (inch) | 80 (3.14) | |
Distance from tilting axis center to spindle center | mm (inch) | 120~-280 (4.72~-11) | |
Distance from table to floor | mm (inch) | 950 (39.37) | |
Max. table loading capacity | ㎏ | 50 | |
Tool magazine | Tool storage capacity | pcs | 24 arm (opt.60) Turning tool (Max capacity:10T) |
ATC type | type | BT30 | |
Max. tool length | mm (inch) | 200 (7.87) | |
Max. tool diameter | mm (inch) | 80 (3.14) | |
Max. tool weight | ㎏ | 3 | |
Dimension | Machine weight | kg | 4,500 (std.) |
Power consumption | kva | 15 | |
Floor space (L x W x H) | mm (inch) | 3,160 x 2,000 x 2,500 (124.4 x 78.74 x 98.42) | |
Container loading capacity | – | 1×40’HQ (3sets) |