Tooling for parts productionExperience always shows that measures to reduce the idle times of your machines are significantly more worthwhile than chasing seconds in the actual machining process. The solution is a stable and exact reference system. This lets you preset away from the machine and then set up the machine with minimum idle time. – Quickly and precisely! |
 |
Introduction – Rough guidance to tooling
| Maximum workpiece weight (kg) | |||||
| Pallet size (mm) |
Macro | MacroMagnum | Matrix | GPS 70 | GPS 120 |
| ⧄ 52-54 | 5 kg | 5 kg | |||
| ⧄ 54-Ø 75 | 10 kg | 10 kg | |||
| Ø 70 | 10 kg | 10 kg | |||
| Ø 110-116 | 50 kg | 50 kg | 50 kg | ||
| Ø 120 | 20 kg | ||||
| Ø 142-185 | 50 kg | 100 kg | 100 kg | ||
| Ø 220-260 | 100 kg | 200 kg | |||
| Maximum workpiece weight (kg) | |||||
| Pallet size (mm) |
GPS 240 Square | GPS 240 Round | Dynafix | Delphin | DelphinBig |
| Ø 256 | 150 kg | ||||
| ⧄ 240-300 | 150 kg | ||||
| ⧄ 280-400 | 250 kg | ||||
| □ 398 | 2000 kg | ||||
| □ 448 | 2000 kg | ||||
| □ 250-3000 | 500 kg / chuck; max 2000 kg | ||||
| □ 500-10000 | 2000 kg / chuck; max 10000 kg | ||||
 |
MacroStd and MacroHPMacro is a reference system. A system that minimises the throughput time, and which, thanks to its accuracy, practically eliminates rejects. A system that increases flexibility and profitability… |
MacroNanoNano-precision machining requires nano-precision referencing of workpieces and tools- a real challenge even with state of the art solutions available in the market… |
 |
 |
MacroMagnumMacroMagnum is larger variant of the patented Macro system. The high clamping force and the position of the reference surfaces far away from the chuck centre… |
MatrixAs well as extreme accuracy, Matrix features low construction height, ultra-precise indexing, a drawbar with through hole. The through hole allows high/long workpieces to be sunk into the chuck for stable/rigid fixation… |
 |
 |
GPS70 and GPS120The machining zero point is defined by the centre of the chuck in the GPS 70 and GPS 120 system. The chucks can be mounted on the machine table of any machine tool… |
GPS240The machining zero point is defined by the centre of the chuck in the GPS 240 system. The system is made for universal use and can be used in all kinds of applications milling, turning, grinding, EDM and measuring… |
 |
 |
DynafixDynafix permits machining with optimal cutting data, without sacrificing accuracy and quality. The easy-to-handle aluminium pallets have reference elements of high-alloy steel with directly measurable Z-references… |
Delphin and Delphin BIGThe modular design with the Delphin zero point clamping system offers you the greatest possible flexibility… |
 |
VIDEO:
