| High-efficiency thread mill with end-cutting edge for non-ferrous metals |  |
 |
 |
 |
 |
The high-efficiency thread mill AT-2 R-SPEC (ThreadRacer) is engineered to dramatically reduce machining time in non-ferrous metal applications such as aluminum alloy by its continuous helical cutting ability, which combines drilling and threading into a single process. The AT-2 R-SPEC is also effective as a countermeasure against cutting position misalignment in cast holes.
Features
- Helical drilling + threading can be done simultaneously.
- DLC-IGUSS coating
(1) Left-hand cut configuration enables climb milling to prolong tool life
(2) Superior chip evacuation *Tool DC = φ4.6 or more
(3) Special cutting edge shape suppresses bending of the tool
- Use RPRG to reduce the workload
RPRG is the reference value of tool radius offset. Conventionally, the tool radius value is entered during setup as a parameter of the NC system, which is corrected by checking the thread with a gauge. Now, the process of correction can be simplified by simply inputting the RPRG value as indicated on the tool shank.
Support
Three Support Tools for Your Thread Milling Needs
(1) Reduce Setup Time
(2) Reduce Machining Time
(3) Achieve Stable Tool Life
Lineup
2D Type / 2.5D Type
- M3～M12
Applications
Copper・Brass・Brass Casting・Aluminum Rolled・Aluminum Alloy・Magnesium Alloy Casting・Zinc Alloy Casting
Data
Threading time comparison with conventional method (includes non-cutting time)
