Features of Diamond-coated Routers
A very hard coating is formed by the diamond structure.
This hard and anti-wear coating shows good routing performance on very hard materials.
With Diamond-coated routers, it is possible to enhance tool-life and rout those difficult-to-machine materials that were impossible with conventional routers.
Technical Data
Diamond coated router for Aluminum panel
| Work | AC-7302(2W/mk) t1.5mm(Non copper,100μm/Insulating layer,1.5mm/Aluminum plate) x 1 panel/strack |
| Conditions | N = 30krpm, Fxy = 0.6m/min, f = 20μm/rev, Fz = 0.1m/min, DIB = 1.0mm |
Burr condition バリ発生状態 |
Cutting edge wear 切刃状態 |
||||
| Non-coat (After 1m) |
ULF coated (After 1m) |
New Diamond coated (After 20m) |
Non-coat (After 1m) |
ULF coated (After 1m) |
New Diamond coated (After 20m) |
 |
 |
 |
 |
 |
 |
DCRSE for PCB Assembly
Diamond coated router “DCRSE” has good performance for Aluminum 4000 series which is often used for Aluminum base panels in recent years.
Optimized coating and high-quality 2 flute/left-hand (down-draft) design achieve controlling burr and smooth surface.
To inquire for the detail, please click on “CONTACT” button below.
Panel Appearance |
Router Appearance (φ2.0) |
||||
| Conventional Diamond-cut |
Conventional 2 flute |
New DCRSE |
Conventional Diamond-cut |
Conventional 2 flute |
New DCRSE |
 |
 |
 |
 |
 |
 |
Material：A4045 Aluminum core panel t1.5mm
Routing Condition：N 30krpm、 F 0.6m/min
