Achieve ideal balance for 1-2 processes
Highly efficient machining with spindles with same capacity on left and right
Left and right spindles equipped with high accuracy integral motor/spindles make part transfer possible during spindle operation with synchronized C axis control.
LT2000 EX:
-Spindle motor: 11.5/7.5 kW (5 min/cont)
-Bar dia: Standard spindle: ø51mm / Big-Bore spindle: ø65mm*1
LT3000 EX:
-Spindle motor: 22/15 kW (30 min/cont)
-Bar dia: Standard spindle: ø65mm*2 / Big-Bore spindle: ø80mm
*1. Left spindle only
*2. Up to ø69 mm is possible with 10-inch chuck.
Note: The chuck/cylinder used may limit machinable bar diameters.
Turrets with the same upper and lower capacity enable full process-intensive machining
V16 turrets are used on both top and bottom to handle complex shape, multi-process, high mix production. Setup change time can be shortened with permanent tool sets.
LT2000 EX:
-Milling-tool spindle motor: 5.5/3.7 kW (2 min/cont)
LT3000 EX:
-Milling-tool spindle motor: 7.1/4.1 kW (25 min/cont)
With Rapid traverse: X axis: 30 m/min, Z axis: 40 m/min
Achieve the best production system with our abundant lineup
Achieve even greater productivity and process-intensive machining by selecting specifications matched to use, such as simultaneous machining with 3 upper/lower turrets or simultaneous upper/lower Y-axis machining.
Minimize takt time with third turret (Optional)
Well-balanced cycle times achieved with simultaneous machining using upper left and right turrets and lower turret. Cycle times can be significantly shortened.
Y-axis specifications (Optional) added on all turrets
Simultaneous upper/lower Y-axis machining possible.
| LT2000 EX | LT3000 EX | |
| Y-axis travel | 95 mm YA, YB, YC: +50 to −45 |
125 mm YA, YB, YC: +70 to −55 |
VIDEO TWIN STAR LT2000EX:
Machine Specifications:
| Model | LT2000 EX | |||||||
| 2-turret specs | 3-turret specs | |||||||
| 2M | 1MY | 2MY | 3M | 2MY | 3MY | |||
| Capacity | Swing over saddle | mm (in.) | ø400 (ø15.75) | |||||
| Max machining dia × length*1 |
mm (in.) | ø210 × L130 (ø8.28 × L5.12) | ||||||
| Distance between noses | mm (in.) | 960 (37.80) | 990 (38.98) | |||||
| Travel | X axis | mm (in.) | XA, XB: 205 (+175 to −30) (8.07 (+6.89 to −1.18)) | XA, XB, XC: 205 (+175 to −30) (8.07 (+6.89 to −1.18)) | ||||
| Z axis | mm (in.) | ZA, ZB: 700 (27.56), W: 730 (28.74) | ZA, ZC: 400 (15.75), ZB: 730 (28.74), W: 760 (29.92) | |||||
| Y axis | mm (in.) | – | YA: 95 (3.74) (+50 to −45) (+1.97 to −1.77) |
YA, YB: 95 (3.74) (+50 to −45) (+1.97 to −1.77) |
– | YA, YB: 95 (3.74) (+50 to −45) (+1.97 to −1.77) |
YA, YB, YC: 95 (3.74) (+50 to −45) (+1.97 to −1.77) |
|
| C axis | deg | 360 (minimum control angle 0.001) | ||||||
| Spindle (L/R) | Speed | min-1 | 50 to 6,000 [50 to 5,000 (Left spindle only)] | |||||
| Speed ranges | 2 auto ranges (motor coil switching, 2 ranges) | |||||||
| Spindle nose | ø140 flat [JIS A2-6 (Left spindle only)] | |||||||
| Spindle bore / Front bearing ID |
mm (in.) | ø62/100 (ø2.44/3.94) [ø80/120 (ø3.15/4.72) (Left spindle only)] | ||||||
| Turret | Type | Multitasking V16 [V12] | ||||||
| No. of tools | 16 [12] (L, M) | |||||||
| OD tool shank | mm (in.) | □20/ø32 (□0.79/ø1.26) | ||||||
| Milling tool spindle speed | min-1 | 45 to 6,000 | ||||||
| Rapid traverse | X axis | m/min (ipm) | 30 (1,181) | |||||
| Z axis | m/min (ipm) | 40 (1,575) | ||||||
| Y axis | m/min (ipm) | – | 15 (591) | – | 15 (591) | |||
| W axis | m/min (ipm) | 32 (1,260) | ||||||
| C axis | min-1 | 200 | ||||||
| Motors | Main spindles | kW (hp) | L/R: 11.5/7.5 (15.3/10) [22/15 (30/20)] (5 min/cont) | |||||
| Milling tool | kW (hp) | 5.5/3.7 (7.5/5) (2 min/cont) | ||||||
| X axis | kW (hp) | XA: 3.5 (4.7), XB: 3.0 (4) | XA, XC: 3.5 (4.7), XB: 3.0 (4) | |||||
| Z axis | kW (hp) | ZA, ZB: 3.5 (4.7) | ZA, ZB, ZC: 3.5 (4.7) | |||||
| Ys axis | kW (hp) | – | YsA: 3.5 (4.7) | YsA: 3.5 (4.7) YsB: 2.2 (3) |
– | YsA: 3.5 (4.7) YsB: 2.2 (3) |
YsA, YsC: 3.5 (4.7) YsB: 2.2 (3) |
|
| Coolant motor (50/60 Hz) | kW (hp) | 0.55/0.75 (0.7/1) × 3 | 0.55/0.75 (0.7/1) × 4 | |||||
| Machine size | Height | mm (in.) | Side discharge: 2,285 (89.96) Rear discharge: 2,435 (95.87) |
Side discharge: 2,301 (90.59) Rear discharge: 2,451 (96.50) |
Side discharge: 2,285 (89.96) Rear discharge: 2,435 (75.87) |
Side discharge: 2,301 (90.59) Rear discharge: 2,451 (96.50) |
||
| Floor space (including tank) | mm × mm (in.) | Side discharge: 3,745 × 2,464 (147.44 × 97.01), Rear discharge: 3,231 × 3,417 (127.20 × 134.53) | ||||||
| Weight (with CNC) | kg (Ib) | 8,500 (18,700) | 9,000 (19,800) | 9,300 (20,460) | 9,800 (21,560) | |||
| CNC | OSP-P300LA | |||||||
*1: Rough dimensions for work lengths that can be axially milled simultaneously on 2 turrets
[ ] Optional
| Model | LT3000 EX | |||||||
| 2-turret specs | 3-turret specs | |||||||
| 2M | 1MY | 2MY | 3M | 2MY | 3MY | |||
| Capacity | Swing over saddle | mm (in.) | ø550 (ø21.66) | |||||
| Max machining dia × length*1 |
mm (in.) | ø350 × L200 (ø13.78 × L7.88) | ||||||
| Distance between noses | mm (in.) | 1,200 (47.25) | ||||||
| Travel | X axis | mm (in.) | XA, XB: 255 (+225 to −30) (10.04 (+8.86 to −1.18)) | XA, XB, XC: 255 (+225 to −30) (10.04 (+8.86 to −1.18)) | ||||
| Z axis | mm (in.) | ZA, ZB: 930 (36.61), W: 940 (37.01) | ZA, ZC: 480 (18.90), ZB: 930 (36.61), W: 940 (37.01) | |||||
| Y axis | mm (in.) | – | YA: 125 (4.92) (+70 to −55) (+2.76 to −2.17) |
YA, YB: 125 (4.92) (+70 to −55) (+2.76 to −2.17) |
– | YA, YB: 125 (4.92) (+70 to −55) (+2.76 to −2.17) |
YA, YB, YC: 125 (4.92) (+70 to −55) (+2.76 to −2.17) |
|
| C axis | deg | 360 (minimum control angle 0.001) | ||||||
| Spindle (L/R) | Speed | min-1 | 45 to 5,000 [45 to 4,200] | |||||
| Speed ranges | 2 auto ranges (motor coil switching, 2 ranges) | |||||||
| Spindle nose | A2-6 [A2-8] | |||||||
| Spindle bore / Front bearing ID |
mm (in.) | ø80/120 (ø3.15/4.72) [ø91/140 (ø3.58/5.51)] | ||||||
| Turret | Type | Multitasking V16 [V12] | ||||||
| No. of tools | 16 [12] (L, M) | |||||||
| OD tool shank | mm (in.) | □25/ø40 (□0.98/ø1.57) | ||||||
| Milling tool spindle speed | min-1 | 45 to 6,000 | ||||||
| Rapid traverse | X axis | m/min (ipm) | 30 (1,181) | |||||
| Z axis | m/min (ipm) | 40 (1,575) | ||||||
| Y axis | m/min (ipm) | – | 20 (787) | – | 20 (787) | |||
| W axis | m/min (ipm) | 40 (1,575) | ||||||
| C axis | min-1 | 200 | ||||||
| Motors | Main spindles | kW (hp) | L/R: 22/15 (30/20) [30/22 (40/30)] (30 min/cont) | |||||
| Milling tool | kW (hp) | 7.1/4.1 (9.5/5.5) (25 min/cont) | ||||||
| X axis | kW (hp) | XA, XB: 3.5 (4.7) | XA, XB, XC: 3.5 (4.7) | |||||
| Z axis | kW (hp) | ZA, ZB: 3.5 (4.7) | ZA, ZB, ZC: 3.5 (4.7) | |||||
| Ys axis | kW (hp) | – | YsA: 3.5 (4.7) | YsA: 3.5 (4.7) YsB: 2.2 (3) |
– | YsA: 3.5 (4.7) YsB: 2.2 (3) |
YsA, YsC: 3.5 (4.7) YsB: 2.2 (3) |
|
| Coolant motor (50/60 Hz) | kW (hp) | 0.55/0.75 (0.7/1) × 3 | 0.55/0.75 (0.7/1) × 4 | |||||
| Machine size | Height | mm (in.) | Side discharge: 2,650 (104.33) Rear discharge: 2,750 (108.27) |
|||||
| Floor space (including tank) | mm × mm (in.) | Side discharge: 4,504 × 2,750 (177.32 × 108.27), Rear discharge: 3,994 × 3,743 (157.24 × 147.36) | ||||||
| Weight (with CNC) | kg (Ib) | 11,200 (24,640) | 12,600 (27,720) | |||||
| CNC | OSP-P300LA | |||||||
*1: Rough dimensions for work lengths that can be axially milled simultaneously on 2 turrets
[ ] Optional
