YTH-ES– Medium Pressure Unit for Through-spindle Coolant System

Turbulence™ Filter

Special turbulence cleans the filter automatically, rendering the filter clog free.

Trochoid™ pump/2.0 MPa, 1.5 MPa

A rotor turning in a trochoidal curve generates pressure to suck and discharge fluid. This is an extremely efficient self-priming pump.

Compatible with TAZUNA™ Fluid Control System (Software)

TAZUNA reduces the electric power cost further by approximately 20%.
The pressure and flow rate are automatically adjusted.

An All-in-one, Medium Pressure Coolant Unit

Turbulence™ Filter

• Maximum operating pressure: 2.0 MPa.
  
• Maximum flow rate: 28.8 liters/min.
  
• No suction filter is required.
  
• No inline filter is required.
  
• No plumbing is required to interconnect various components.

High Efficiency Trochoid™ Pump

YTH-ES Type (Wear-resistant Model)

• Compatible fluid type
  • Water soluble coolant, non-water soluble coolant.
  • Incompatible with lubricant oils, fuel oils.
  • Incompatible with clear water, demineralized water, aqueous solutions and viscous fluids without rust-preventive property, corrosive fluids, solvents, oil-based materials.

• Relief valve is built into the pump.

• Balance Plate
  • Pump generates inner pressure to press the balance plate toward the Trochoid rotor side, which helps in reducing the clearance created by wear on rotor side and thereby minimize the pressure drop, ensuring desired performance for a longer time.
• Shaft and Bearing Reinforcement
  • Improved wear resistance by employing sprayed ceramic on shaft bearing area and use of ceramic bearing.
• Double Seal & Cartridge System
  • Seal area is reinforced to prevent leakage and cartridge system ensures ease of replacement.